Portable Clamp On Ultrasonic Flow Meter
I. Introduction
ML-6100P is a full function portable transit-time ultrasonic flow meter. No matter you want to quickly verify the flow reading of another meter or to data log flow system values over an extended time period, the MELAN’s 6100P is the suitable tool.
The 6100P portable meter has the clamp on transducers no tapping or cutting is required, just clamp outside of the pipe. The meter can be easily moved and installed in different pipe and convenient to carry site to site.Its portability makes it an excellent choice for measuring flows throughout the plumbing infrastructure to verify sensor, pump and valve performance.
II. Working Principle
The external clamp type or pipe section type ultrasonic flow meter is based on the principle of "velocity difference method" to measure the liquid flow in the pipe. It adopts advanced multi pulse technology, digital signal processing technology and error correction technology, so that the flow meter can adapt to the environment of industrial field, and the measurement is more convenient, economical and accurate. The products have reached the advanced level at home and abroad, and can be widely used in the fields of petroleum, chemical industry, metallurgy, electric power, water supply and drainage, etc.
III. Specification
| Performance |
| Velocity Range |
±0.09ft/s ~ ±39ft/s (±0.03m/s ~ ±12m/s) |
| Accuracy |
±1% of measured value |
| Repeatability |
0.2% of measured value |
| Linearity |
±1% |
| Pipe Size |
DN25~DN1200(A pair of sensors) |
| Function |
| Output |
Analog output: 4~20mA, max load 750Ω. |
| Pulse output: 0~10KHz |
| Communication |
RS485 Modbus |
| Power Supply |
Rechargeable Lithium Battery Power,3000mAh
|
| Display |
240*128 back lit LCD |
| Temperature |
Transmitter: -14℉~140℉(-20℃~60℃) |
| Transducer:-40℉~176℉(-40℃~80℃,D1) |
| Transducer:-40℉~266℉(-40℃~130℃,D1U) |
| Humidity |
Up to 99% RH,non-condensing |
| Physical |
| Transmitter |
NEMA13, IP54 |
| Transducer |
Encapsulated design,IP68 |
| Double-shielded transducer cable |
| Standard/maximum cable length:30ft/1000ft(9m/300m) |
IV. Configuration
| Model |
Transmitter |
| ML-6100P |
PortableType |
| Velocity Range:±0.09ft/s ~ ±39ft/s (±0.03m/s ~ ±12m/s) |
| Accuracy :±1% of the measure value |
| Repeatability:0.2% of the measure value |
| Display:240*128 back lit LCD |
| Internal Lithium Power Supply: 3000mA |
| Transmitter Enclosure: IP54 |
| Output: OCT pulse output 0-10KHz, Relay output, 4-20mA for option |
| Communication: RS485 |
| Code |
Type of Trnansmitter |
| 1 |
Ultrasonic Flow Meter |
| 2 |
Ultrasonic Energy / BTU Meter(RTD) |
| Code |
Transducer |
| D1 |
Clamp-on, IP68. Operating temperature:-40 ℉ ~ +176 ℉(-40℃ ~ +80 ℃) |
| D1U |
Clamp-on, IP68. Operating temperature:-40 ℉ ~ +266℉(-40℃ ~ +130 ℃) |
| Code |
Type of Mounting Bracket |
|
ST
|
Single guide mounting type bracket
|
| DT |
Double guide mounting type bracket
|
| Code |
Transducer Cable Length |
| P5 |
Standard length 16ft (5m) |
| PXX |
XX is the length you need for cables, Maximum length is up to 30m.
|
| Code |
Temperature Transducer |
| PT1000 |
PT1000 temperature transducer+RTD module(option) |
V. Accessories
1. Carrying Case*1pc.
2. Transmitter (Electronic)*1pc.
3. Transducer (Sensor) *1 pair.
4. Mounting bracket*1 set, ST or DT
5. Pipe straps *2 pairs.
6. Battery charge*1pc, Output cable*1pc and Tapeline*1
Product Tags:
|
|
0.03m/s IP65 Rechargeable Battery Clamp On Flow Meter Images
|
